How do you make bubble bags?

Making bubble hash is easy as long as you have the steps on how to do it. But before making bubble hash, you will need bubble bags.  
Making a bubble bag is as easy as making a typical bag but in a tapered shape and its bottom is made of fine screen. There is a wide variety of screens you can choose from in terms of sizes and colors. You can also save yourself the hassle and buy brands online such as Trichome from Hydro Willys. When making the bags, you want to make sure it is a monofilament screen because it is thick and does not allow the materials you need to be scraped, then you make a taper for the extraction bag. You cut the material into an unusual C shape as this is essentially the cone for the bubble bag. Get the top and bottom radius of the bag and decide how deep you want your bag to be. Do the calculations to get the total height of the cone.
Get three pieces of string:

·         A length of a total height of the cone

·         A length of the total circumference of the top of the bag ((Radius x 2) x 3.14)

·         Length of your desired height or depth of the cone

Then take the long piece of string (total H), pin it to the ground and use a chalk to draw a quarter of a circle. Next, take the other piece (desired height or depth), draw a smaller quarter or a circle in the larger circle. Then using the circumference string, run it along the total H string for this is the right diameter of the bag. Then mark H at the end of the circumference string. Next, get the H string that is connected to the top cone and draw a line down. This is the template of your tapered bag.  Then trace it on a cardboard or plastic and trace it again on your material for the bubble bag.